Money & Calculators

Seven Percentage Calculations Most People Get Wrong

Percentages trip people up because the base keeps changing. Here are the seven calculations that go wrong most often, with the mistake, the fix and the numbers.

Seven Percentage Calculations Most People Get Wrong
Photo by Tamanna Rumee on Pexels

Key takeaways

  • Every percentage is a fraction of some base; most mistakes come from using the wrong base.
  • A rise from 40 to 50 is +25%, but a fall from 50 to 40 is −20%, because the base changes direction.
  • Going from 5% to 7% is a rise of 2 percentage points but a 40% increase.
  • To remove a 20% discount or 20% VAT, divide by 0.8 or 1.2; never multiply by the opposite percentage.
  • Stacked discounts multiply rather than add: 20% then 10% off is 28% off, not 30%.

Almost every percentage mistake comes from one source: using the wrong base. A percentage is always a fraction of something, and when the something changes between two steps, intuition fails. The seven calculations below are the ones that go wrong most often in shops, on payslips, in news headlines and in spreadsheets. Each comes with the mistake, the fix and a worked example you can check.

Percent of a number and percent change

Percent of, and what percent of

The basic form is rarely the problem. To find 15% of 80, convert the percentage to a decimal and multiply: 0.15 × 80 = 12. To find what percent 30 is of 120, divide the part by the whole and multiply by 100: 30 ÷ 120 × 100 = 25%.

The mistake appears when the two forms are confused. "48 is what percent of 120?" is 48 ÷ 120 = 40%. "What is 48% of 120?" is 57.6. The numbers are the same; the questions are not. Read for the word of: whatever follows it is the base, and the base is always the divisor.

Increasing a number by a percentage is one multiplication, not two. To raise 250 by 12%, multiply by 1.12 to get 280. To cut it by 12%, multiply by 0.88 to get 220. Working out 12% separately and then adding gives the same answer, but it doubles the chance of a slip.

A percentage of a percentage follows the same rule. If an agent takes 15% commission and then pays 40% of that commission to an assistant, the assistant receives 40% of 15%, which is 0.4 × 0.15 = 6% of the sale, not 55% or 25%. Multiply the decimals and the base takes care of itself.

Percent change: the direction changes the answer

Percent change is (new − old) ÷ old × 100. The base is always the old value, the one you started from. This is where the first real surprise lives.

A price goes from 40 to 50. The change is (50 − 40) ÷ 40 = 0.25, a 25% increase. The price then goes back from 50 to 40. The change is (40 − 50) ÷ 50 = −0.20, a 20% decrease. The same 10 is 25% of 40 but only 20% of 50.

The consequence is that gains and losses are not symmetrical. A share that rises 50% and then falls 50% is not back where it started: 100 × 1.5 = 150, and 150 × 0.5 = 75. A 20% fall needs a 25% rise to recover, because 80 × 1.25 = 100. A 50% fall needs a 100% rise. The deeper the loss, the larger the recovery required, and that asymmetry catches out anyone comparing two headlines without checking the base.

When you need to be precise about which direction you are calculating, the percentage calculator has separate modes for increase, decrease and change between two values, so the base is never ambiguous.

Percentage points are not percent

If an interest rate goes from 5% to 7%, how much did it rise? Both of these are correct, and they are very different claims:

  • It rose by 2 percentage points (7 − 5).
  • It rose by 40 percent ((7 − 5) ÷ 5 × 100).

A percentage point is the simple difference between two percentages. Percent change is that difference relative to the starting value. Headlines and adverts choose whichever sounds bigger. "Unemployment up 40%" and "unemployment up 2 points" can describe exactly the same move from 5% to 7%.

A mortgage rate rises from 4.5% to 5.25%. In points, that is 0.75. In percent, it is 0.75 ÷ 4.5 = 16.67%. If a lender says rates have gone up "by less than one percent", they mean points, and your monthly payment will not agree.

The rule of thumb: if both numbers are already percentages, subtracting them gives points. Dividing them gives percent change. Say which one you mean.

A sale sign showing a percentage discount in a shop window
Photo by Willfried Wende on Pexels

Reversing and stacking discounts

Reversing a discount: divide, do not multiply

A jacket is 60 after 25% off. What was the original price? The tempting answer is 60 plus 25% of 60, which is 60 × 1.25 = 75. It is wrong, because the 25% was taken off the original price, not off 60. The original price is the base.

The sale price is 75% of the original, so the original is 60 ÷ 0.75 = 80. Check it: 25% of 80 is 20, and 80 − 20 = 60. The general rule for undoing a percentage decrease is to divide by (1 − rate), and for undoing an increase, divide by (1 + rate).

Another example: 80 after 20% off. Multiplying by 1.2 gives 96, but 20% off 96 is 76.80, not 80. Dividing by 0.8 gives 100, and 20% off 100 is 80. The difference between the wrong answer and the right one grows with the size of the discount, so on a "70% off" sale the multiply-back error is enormous.

The discount calculator works forwards from the original price: enter the price, the discount and any extra discount, and it shows the sale price and the true combined saving. To go backwards from a sale price, divide by (1 − rate) as above, then enter the result to check it.

Stacking discounts: they multiply, not add

A shop offers 20% off everything, plus an extra 10% off at checkout with a code. That is not 30% off. The second discount is taken from the already-reduced price, so the base has shrunk before it applies.

On 100: 20% off leaves 80. Then 10% off 80 leaves 72. The total discount is 28%, not 30%. On a 250 basket: 250 × 0.8 = 200, then 200 × 0.9 = 180. A single 30% discount would have given 175, so the stacked offer is worth 5 less than it sounds.

To combine any number of discounts, multiply the remaining fractions together. Three discounts of 20%, 10% and 5% leave 0.8 × 0.9 × 0.95 = 0.684 of the price, a combined discount of 31.6%, not 35%. The order does not matter for the final price, because multiplication is commutative; it only matters if one of the discounts has a minimum spend attached.

The same logic applies to successive price rises. Two increases of 10% are a 21% increase, not 20%, because the second 10% is applied to a larger base. Compound growth is just stacking in the upward direction.

Markup and margin are the same trap with prices. A shop that adds 25% to a cost of 60 sells at 75, but its profit of 15 is 20% of the selling price, not 25%, because markup uses the cost as its base and margin uses the selling price. To earn a 40% margin on that cost, the price is 60 ÷ (1 − 0.4) = 100, not 60 × 1.4 = 84. The profit margin calculator shows margin and markup side by side, and can start from a cost and a target margin to find the price.

VAT and sales tax: inclusive versus exclusive

Tax questions combine the "which base" problem with the "reverse a percentage" problem, which is why they produce so many wrong invoices.

Adding tax to a net price

This direction is straightforward. A net (tax-exclusive) price of 100 with 20% VAT is 100 × 1.2 = 120 gross. A net price of 49.99 with 8.25% sales tax is 49.99 × 1.0825 = 54.11, of which 4.12 is tax.

Removing tax from a gross price

Here the error is almost universal. Gross 120 includes 20% VAT. Taking 20% off 120 gives 96, which is wrong, because the 20% was charged on the net figure, not the gross. Divide instead: 120 ÷ 1.2 = 100 net, and the VAT is 20. With 20% VAT the tax is always one sixth of the gross, not one fifth; 120 ÷ 6 = 20 confirms it.

A receipt shows 59.99 including 20% VAT. Net: 59.99 ÷ 1.2 = 49.99. VAT: 59.99 − 49.99 = 10.00. A US receipt of 85.60 includes 7% sales tax. Net: 85.60 ÷ 1.07 = 80.00, so the tax was 5.60.

The general rule is the same as for discounts. To add a percentage, multiply by (1 + rate). To remove a percentage that was added, divide by (1 + rate). The VAT and sales tax calculator has an explicit "remove tax" mode for exactly this, and shows the net, tax and gross side by side so an invoice can be checked in seconds.

Be careful with the word "inclusive". A price quoted "inclusive of VAT" is the gross; "exclusive" or "plus VAT" is the net. Business-to-business quotes are usually exclusive, consumer prices usually inclusive, and mixing them up on a quote is a 20% error in either direction.

A calculator and a notebook with maths working
Photo by Kaboompics on Pexels

Tips and splitting the bill

Tipping is simple percent-of maths, and the common mistakes are rounding too early and tipping on the wrong base.

The bill is 64.80 and you want to leave 18%. The tip is 64.80 × 0.18 = 11.66. The total is 76.46. Split between four people, each pays 76.46 ÷ 4 = 19.12 (19.115, rounded up so the restaurant is not short). Work out the tip on the full bill first, then divide; dividing first and then each tipping separately produces rounding drift.

A mental shortcut: 10% of 64.80 is 6.48, 5% is half of that (3.24), and 1% is 0.65. So 18% is 6.48 + 3.24 + 3 × 0.65 = 11.67, within a penny of the exact figure. For 15%, add the 10% and 5% figures. For 20%, double the 10% figure.

Rounding deserves a moment of thought when a bill is shared. If each person rounds their own share down to the nearest whole unit, a party of four can easily leave the restaurant two or three short of the intended total. Round the per-person figure up, or have one person pay the exact total and collect round amounts from the others. The arithmetic is trivial; the drift only appears because it is done four separate times.

Two base questions arise in some countries. Should the tip be on the pre-tax or post-tax amount? Custom varies, but the pre-tax subtotal is the traditional base in the United States. And has a service charge already been added? If so, it is usually in place of a tip, not in addition to one. The tip calculator handles the percentage, the total and the per-person split together, and rounds per person so the group total adds up.

The mistakes at a glance

CalculationThe mistakeWrong answerCorrect methodRight answer
50 back down to 40Reusing the +25% figure−25%(40 − 50) ÷ 50−20%
Rate from 5% to 7%Calling 2 points "2 percent"+2%(7 − 5) ÷ 5+40% (2 points)
Original price of 60 after 25% offMultiplying by 1.257560 ÷ 0.7580
20% off then 10% offAdding the discounts30% off1 − (0.8 × 0.9)28% off
Net price of 120 inc. 20% VATTaking 20% off the gross96120 ÷ 1.2100
Up 50% then down 50%Assuming it cancelsBack to 100100 × 1.5 × 0.575
18% tip on 64.80 split four waysSplitting first, rounding eachShort by pennies(64.80 × 1.18) ÷ 419.12 each

A habit that prevents all of them

Before you calculate, say the base out loud: "25% of the original price", "20% of the net amount", "a 2-point rise from 5". If the base in the question is not the number you have in your hand, you need to divide rather than multiply, or find the base first. Then check the answer by running it forwards. If you think the original price was 80, take 25% off it and see whether you land on 60. Forward checks take ten seconds and catch nearly every reversed-percentage error.

Spreadsheet users have one extra trap: formatting a cell as a percentage multiplies the display by 100 but not the value. A cell containing 0.2 shows as 20%, and typing 20 into a percentage-formatted cell stores 0.2 in some programs and 20 (shown as 2000%) in others. Always check which one your software does before building a formula on it.

Where to go next

For everyday arithmetic in any of the forms above, the percentage calculator covers percent of, percent change and increase or decrease. For shopping, the discount calculator stacks multiple offers correctly, and the VAT and sales tax calculator adds or strips tax from either side of a price. Each runs in your browser and nothing you enter leaves your device.

Frequently asked questions

What is the difference between percent and percentage points?

Percentage points measure the simple difference between two percentages, while percent change measures that difference relative to the starting value. A rate rising from 5% to 7% is up 2 percentage points, but up 40 percent, because 2 is 40% of 5. Both statements are true. News reports and adverts tend to pick whichever sounds more dramatic, so always ask which one is being used.

How do I work out the original price before a discount?

Divide the sale price by one minus the discount rate. If something costs 60 after 25% off, the original price is 60 divided by 0.75, which is 80. Do not add 25% back to 60, because that gives 75 and the discount was taken from the original figure, not from 60. Check your answer by applying the discount to it and confirming you get the sale price.

Why is 20% off plus 10% off not 30% off?

Because the second discount applies to the already-reduced price. On 100, 20% off leaves 80, and 10% off that leaves 72, so the combined discount is 28%. To combine discounts, multiply the remaining fractions: 0.8 times 0.9 equals 0.72. The order you apply them in does not change the final price, but adding the percentages together always overstates the saving.

How do I remove VAT from a price that includes it?

Divide the gross price by one plus the VAT rate. For 20% VAT, divide by 1.2: a gross price of 120 is 100 net, and the VAT is 20. Taking 20% off the gross figure gives 96, which is wrong because VAT was charged on the net amount, not the gross. A quick check at 20% is that VAT is always one sixth of the gross price.

Should a tip be calculated before or after tax?

Custom varies by country and even by region. In the United States the traditional base is the pre-tax subtotal, although many people tip on the full total for simplicity, and the difference is small. If a service charge has already been added to the bill, it is normally intended as the tip rather than something to add a tip on top of. Work out the tip on the whole bill before splitting it between people.

Why does a 50% loss need a 100% gain to recover?

Because the gain is measured against the smaller base left after the loss. If 100 falls 50% to 50, getting back to 100 means adding 50, and 50 is 100% of 50. The same logic means a 20% fall needs a 25% rise, and a 10% fall needs about an 11% rise. Percentage gains and losses are never symmetrical, which matters when comparing investment returns.

Try the tools from this guide

Keep reading

Related guides

All guides