Inches to Centimeters Converter

The converter above is already set to inches and centimeters, so you only need to enter your number. The result updates as you type, and nothing is sent anywhere.

1. Type your value in the Value box, for example 10. Decimals and negative numbers are accepted.
2. Check that From shows inches and To shows centimeters. Both menus can be changed if you need a different pair.
3. Read the answer in the large result box. The note under it shows the exact factor used for one inch.
4. Press Copy result to put the answer on your clipboard, or Swap units to convert in the opposite direction.
5. Look at In every unit on the right to see the same amount in all the other length units.

One inch is exactly 2.54 centimeters, so the formula is centimeters = inches x 2.54. Going the other way, one centimeter is about 0.393701 inches. The inch has been defined as exactly 25.4 millimeters since the international yard and pound agreement of 1959. A centimeter is one hundredth of a meter, about the width of a fingernail.

Worked examples with the same factor:

• 10 inches: 10 x 2.54 = 25.4 centimeters
• 25 inches: 25 x 2.54 = 63.5 centimeters
• 100 inches: 100 x 2.54 = 254 centimeters

Multiply by 2.5 and add a hair: 10 inches is about 25 cm, exactly 25.4.

To check the converter by hand, take 25 inches and apply the rule once: the result should be 63.5 centimeters. If you go back again with the reverse factor 0.393701 you land on 25 inches, which confirms that the two directions agree. Rounding the factor to fewer digits for mental math gives a result that is close but not identical, so use the tool when the last digits matter.

These reference values come from the same factor the converter uses, so they match what you see above. Use the table for common amounts, and the converter for anything else.

Length units come from two families. The metric units (millimeter, centimeter, meter, kilometer) are powers of ten apart, so moving between them only shifts a decimal point. The customary units (inch, foot, yard, mile) descend from older body-based and road measures and were fixed to the meter by international agreement in 1959, which is why every conversion between the two families has an exact factor.

Use the table as a sanity check rather than a substitute for the converter. If your number sits between two rows, the answer must sit between the two results, and if it is ten times larger the answer is ten times larger. That simple scaling rule catches most typing mistakes, such as an extra zero or a misplaced decimal point.

Screen sizes, tire and pipe sizes and body measurements in US sewing patterns arrive in inches, while forms and shops in most other countries ask for centimeters.

The most common slip is converting only part of a mixed measurement: 5 feet 8 inches is 68 inches in total, not 5.8 feet, so turn the feet into inches (or the inches into a fraction of a foot) before adding. Another is rounding too early, which grows into a visible error over long runs.

Related pages: Centimeters to Inches Converter for the reverse direction, and the inches to millimeters and feet to centimeters pages. For other length units use the length converter.

The page keeps no history, so each visit starts again from the defaults, 10 inches. Your numbers are processed by JavaScript in your own browser and are never sent to a server, which makes the converter safe for private figures such as medical, financial or work measurements.